Does Easy Off Oven Cleaner really work as a furniture stripper? Not always. See how I attempted to remove the finish off of this buffet with Easy Off Oven cleaner and it did not turn out how I expected.
I’m no stranger to stripping furniture. I’ve used many methods and many products trying to remove paint, stain and polyurethane from countless pieces of furniture. Recently I tried four different methods on one piece of furniture. I used Vinegar, Citristrip, a heat gun and Easy Off oven cleaner to remove the finish. I was shocked at which product worked the best.
Because I had so much success with the Easy Off Oven Cleaner product, I decided to try to strip a large buffet.
Full disclosure; this isn’t a successful “how to” post. This is my experience trying to strip the dark stain and sealer off of a buffet that isn’t quite my style. The purpose of this post isn’t to deter you from using this product because I have had success with it in the past. Rather, this is my real life experience with stripping a piece of furniture that isn’t going to strip successfully no matter what stripper product I use.
Now that you know this post isn’t all cupcakes and rainbows, I can proceed.
Table of Contents
Yes! I have had success removing paint and stain from an old desktop. As a matter of fact, when I tested this product with three other successful methods to strip furniture it happened to work the best!
You can see above the four methods and products I used to remove white paint from this cabinet. The Easy Off Oven cleaner not only pulled the most paint off, but it was the easiest and cleanest method.
No. That being said, no product is 100% successful all the time and on all surfaces.
I almost didn’t write this post and publish this video. Then I thought it might just be helpful to some of you who are unsuccessfully trying to use the “oven cleaner stripping” method.
I started with a large buffet that had a dark semi gloss finish. My hope was to strip the finish down to a raw wood look.
It’s a beautiful buffet. It would have been the perfect finish 15 years ago when I was into dark red cherry wood. These days though, meh. You know what I mean right?
The cool thing about this product is that it doesn’t create many fumes. I opted to apply it inside in a VERY WELL ventilated area (I’m applying it next to a wide open door and 4 big open windows). Just to be safe I did wear a mask.
I applied a heavy application evenly on the entire buffet.
I let it sit and soak for 30 minutes. Then I used a soapy warm water solution with a simple scrub brush to try to remove the finish.
This is when I realized things might not work out like I wanted them to.
When I started to brush the finish with the warm soapy water I was hoping to also brush away some of the dark brown finish. Nope.
I sprayed some more Easy Off Oven cleaner and let it sit another hour.
After an hour of waiting I used a plastic scraper to try to scrape most of the finish away. This was a lot more successful but only at peeling the top layer (factory finish? Heavy duty melamine finish? not sure).
This is when I realized that this particular buffet is not made of a material that will strip very well.
Womp womp womp…
Could I continue to apply more layers of Easy Off? Yes but I’m not sure it would give me the natural raw wood look I was going for. I was afraid it would still look orange or red.
Could I sand the wood down? Yes but once again I wasn’t really sure it would give me the result I was looking for. Just to make sure, I sanded a small portion of the back of the buffet to see how easy the finish would come off.
I spent a few minutes sanding this spot and barely any of the dark finish came off. That’s when I knew my gut was right; this piece might not be worth the effort.
The buffet still has a dark red undertone but the top layer/ semi gloss finish is gone!
On one hand the oven cleaner did work at removing the top layer.
Did it achieve the look I was going for? No, but that’s ok!
It did successfully strip that semi gloss finish off. This will allow me to easily apply another finish to it.
Basically it’s a muted version of the original without the semi gloss finish.
Stripping furniture is not predictable. Most of the time I can look at a piece of furniture and tell if it will strip easily. This time I was wrong.
My lesson learned is to always test a small area of the wood before diving into a large furniture stripping project.
This is one of those duh moments.
Now I’m off to decide what to do with this lovely buffet now.
Copyright © 2023 furnitureknowledges.com. All rights reserved.